Oscilloscope

See your signals more clearly
The DSO1000A Series incorporates a bright, crisp LCD color display. You can quickly view your signal from almost any angle. Unlike conventional scopes that always require menus to be on, the entire 5.7-inch diagonal screen is available for waveform display as needed.

True Zoom mode for signal details and context
Dual display and True Zoom shows your entire signal and zoomed in waveform details at the same time.
23 automatic measurements
All DSO1000 Series scopes come equipped with 23 automatic voltage, time and frequency measurements. Press the Measure key to bring up the three you use most often or display all single-channel measurements on the screen simultaneously.

• 300 MHz Bandwidths
• 1.2 ns Rise Time
• Sample rate: 2 GS/s
• Digital Oscilloscope Channel: 2 Channel
• Long Waveform Memory: 12 kpts/Ch (24 kpts interleaved)
• 1.0 ns – 50 s/div Timebase Range
• Advanced Triggering – Edge, Pulse Width, Video, Slope (Rise Time)
• 7″ wide screen display
• 32 automatic measurements
• Multi-language user interface and context sensitive help
• Four math functions and FFT
• USB host and device connections for printers, memory sticks and PC remote control

• 200 MHz Bandwidths
• 1.75 ns Rise Time
• Sample rate: 2 GS/s
• Digital Oscilloscope Channel: 4 Channel
• Long Waveform Memory: 12 kpts/Ch (24 kpts interleaved)
• 2.5 ns/div – 50 s/div Timebase Range
• Advanced Triggering – Edge, Pulse Width, Video, Slope (Rise Time)
• 7″ wide screen display
• 32 automatic measurements
• Multi-language user interface and context sensitive help
• Four math functions and FFT
• USB host and device connections for printers, memory sticks and PC remote control

• 70 MHz Bandwidths
• 5.0 ns Rise Time
• Sample rate: 2 GS/s
• Digital Oscilloscope Channel: 2 Channel
• Long Waveform Memory: 12 kpts/Ch (24 kpts interleaved)
• 5.0 ns/div – 50 s/div Timebase Range
• Advanced Triggering – Edge, Pulse Width, Video, Slope (Rise Time)
• 7″ wide screen display
• 32 automatic measurements
• Multi-language user interface and context sensitive help
• Four math functions and FFT
• USB host and device connections for printers, memory sticks and PC remote control

• 200 MHz Bandwidth
• 5 GS/s Sample Rates and 200 ps Resolution
• 4 Fully Isolated and Floating Channels
• 600 VRMS CAT III, 1000 VRMS CAT II Rated Inputs (BNC to Earth Ground)
• 21 Automatic Measurements
• Waveform Math and FFT Spectral Analysis
• Volts, Time, Frequency, Watts Cursor Measurements
• Measurement Data Logging with TrendPlot™
• Waveform Pass/Fail Limit Testing
• Automatic 100 Display Screens Recorder
• 6 in. (153 mm) Bright Color Display
• USB Device and Host Support
• 7 Hours of Continuous Battery Operation

• 200 MHz Bandwidth
• 5 GS/s Sample Rates and 200 ps Resolution
• 4 Fully Isolated and Floating Channels
• 600 VRMS CAT III, 1000 VRMS CAT II Rated Inputs (BNC to Earth Ground)
• 21 Automatic Measurements
• Waveform Math and FFT Spectral Analysis
• Volts, Time, Frequency, Watts Cursor Measurements
• Measurement Data Logging with TrendPlot™
• Waveform Pass/Fail Limit Testing
• Automatic 100 Display Screens Recorder
• 6 in. (153 mm) Bright Color Display
• USB Device and Host Support
• 7 Hours of Continuous Battery Operation

• 100 MHz Bandwidth
• 2.5 GS/s Sample Rates and 200 ps Resolution
• 4 Fully Isolated and Floating Channels
• 600 VRMS CAT III, 1000 VRMS CAT II Rated Inputs (BNC to Earth Ground)
• 21 Automatic Measurements
• Waveform Math and FFT Spectral Analysis
• Volts, Time, Frequency, Watts Cursor Measurements
• Measurement Data Logging with TrendPlot™
• Waveform Pass/Fail Limit Testing
• Automatic 100 Display Screens Recorder
• 6 in. (153 mm) Bright Color Display
• USB Device and Host Support
• 7 Hours of Continuous Battery Operation

• 16 automated measurements, and FFT analysis for simplified waveform analysis
• Built-in waveform limit testing
• Automated, extended data logging feature
• Autoset and signal auto-ranging
• Built-in context-sensitive Help
• Probe check wizard
• Multiple-language user interface
• 5.7″ active TFT color display
• NIM/NIST traceable certificate of calibration
• USB 2.0 host port on the front panel for quick and easy data storage
• USB 2.0 divice port on rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer

• 16 automated measurements, and FFT analysis for simplified waveform analysis
• Built-in waveform limit testing
• Automated, extended data logging feature
• Autoset and signal auto-ranging
• Built-in context-sensitive Help
• Probe check wizard
• Multiple-language user interface
• 5.7″ active TFT color display
• NIM/NIST traceable certificate of calibration
• USB 2.0 host port on the front panel for quick and easy data storage
• USB 2.0 divice port on rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer

• 16 automated measurements, and FFT analysis for simplified waveform analysis
• Built-in waveform limit testing
• Automated, extended data logging feature
• Autoset and signal auto-ranging
• Built-in context-sensitive Help
• Probe check wizard
• Multiple-language user interface
• 5.7″ active TFT color display
• NIM/NIST traceable certificate of calibration
• USB 2.0 host port on the front panel for quick and easy data storage
• USB 2.0 divice port on rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer

• 16 automated measurements, and FFT analysis for simplified waveform analysis
• Built-in waveform limit testing
• Automated, extended data logging feature
• Autoset and signal auto-ranging
• Built-in context-sensitive Help
• Probe check wizard
• Multiple-language user interface
• 5.7″ active TFT color display
• NIM/NIST traceable certificate of calibration
• USB 2.0 host port on the front panel for quick and easy data storage
• USB 2.0 divice port on rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer

1 GHz
2 Channel Digital Phosphor Oscilloscope
5/2.5 GS/s Sample Rate on 1/2 Channels
5 Megapoint Record Length on All Channels
>50,000 wfm/s Maximum Waveform Capture Rate
Wave Inspector® controls for unprecedented efficiency in waveform analysis
Automated Serial Triggering, Decode, and Search Options for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM
10.4″ XGA Color display
Only 5.8″ Deep and 11 pounds
USB Host and Device Ports for Storage, Printing, and Connectivity
Standard Passive Voltage Probes with Less than 4 pF Capacitive Loading and 1 GHz Analog Bandwidth

Accurate High-speed Probing
The TPP1000 probes, included standard with every DPO4014B oscilloscope, provides 1 GHz of analog bandwidth, and less than 4 pF of capacitive loading. The extremely low capacitive loading minimizes adverse affects on your circuits and is more forgiving of longer ground leads. And, since the probe bandwidth matches your oscilloscope bandwidth, you can see the high-frequency components in your signal which is critical for high-speed applications. The TPP1000 probe, one of the TPP Series of passive voltage probes, offers all the benefits of general-purpose probes like high dynamic range, flexible connection options, and robust mechanical design, while providing the performance of active probes.

• 100 MHz, 4 channels
• Up to 2.5 GS/s on all channels
• 5 Meg record length on all channels
• 50,000 wfm/s max. waveform capture rate
• Automated Serial Triggering, Decode, and Search Options for I2C, SPI, CAN, LIN, RS-232/422/485/UART, and I2S/LJ/RJ/TDM
• Wave Inspector for unprecedented efficiency in waveform analysis
• 29 Automated Measurements and FFT Analysis
• 9″ WVGA color display USB 2.0 for quick and easy storage
• USB 2.0 device port for direct PC control using USBTMC
• Built-in Ethernet port
• TekVPI Probe Interface supports active, differential and current probes for automatic scaling and units
• Only 5.8″ deep and 9 lbs.

• 100 MHz, 2 channels
• Up to 2.5 GS/s on all channels
• 5 Meg record length on all channels
• 50,000 wfm/s max. waveform capture rate
• Automated Serial Triggering, Decode, and Search Options for I2C, SPI, CAN, LIN, RS-232/422/485/UART, and I2S/LJ/RJ/TDM
• Wave Inspector for unprecedented efficiency in waveform analysis
• 29 Automated Measurements and FFT Analysis
• 9″ WVGA color display USB 2.0 for quick and easy storage
• USB 2.0 device port for direct PC control using USBTMC
• Built-in Ethernet port
• TekVPI Probe Interface supports active, differential and current probes for automatic scaling and units
• Only 5.8″ deep and 9 lbs.

• Input Channels: 4
• Analog Bandwidth (-3dB): 100 MHz
• Calculated Rise Time:  3.5ns
• Hardware Bandwidth Limits: 20 MHz
• Input Coupling:  AC, DC, GND
• Input Impedance:  1 MΩ ±2%, 11.5 pF ±2 pF
• Input Sensitivity Range: 2 mV/div to 5 V/div
• Vertical Resolution: 8 bits
• Maximum Input Voltage, 1 MΩ:  300 VRMS with peaks ≤ ±450 V
• DC Gain Accuracy  (with offset set to 0 V):  ±3% for 10 mV/div to 5 V/div;  ±4% for 2 mV/div to 5 mV/div
• Channel-to-Channel Isolation  (Any Two Channels at Equal Vertical Scale):  ≥100:1 at ≤70 MHz

• Input Channels: 2
• Analog Bandwidth (-3dB): 100 MHz
• Calculated Rise Time:  3.5ns
• Hardware Bandwidth Limits: 20 MHz
• Input Coupling:  AC, DC, GND
• Input Impedance:  1 MΩ ±2%, 11.5 pF ±2 pF
• Input Sensitivity Range: 2 mV/div to 5 V/div
• Vertical Resolution: 8 bits
• Maximum Input Voltage, 1 MΩ:  300 VRMS with peaks ≤ ±450 V
• DC Gain Accuracy  (with offset set to 0 V):  ±3% for 10 mV/div to 5 V/div;  ±4% for 2 mV/div to 5 mV/div
• Channel-to-Channel Isolation  (Any Two Channels at Equal Vertical Scale):  ≥100:1 at ≤70 MHz

• 70 MHz Bandwidth Models
• 4 Analog Channel Models
• 1 GS/s Sample Rate on All Channels
• 1 Megapoint Record Length on All Channels
• 5,000 wfm/s Maximum Waveform Capture Rate
• Suite of Advanced Triggers
• Wave Inspector Controls Provide Easy Navigation and Automated Search of Waveform Data
• Automated Serial Triggering, Decode, and Search Options for I2C, SPI, CAN, LIN, and RS-232/422/485/UART
• FilterVu Variable Low-pass Filter Allows for Removal of Unwanted Signal Noise while still Capturing High-frequency Events
• 29 Automated Measurements, and FFT Analysis for Simplified Waveform Analysis
• TekVPI Probe Interface Supports Active, Differential, and Current Probes for Automatic Scaling and Units
• 7 inch (180 mm) Widescreen TFT-LCD Color Display
• USB 2.0 Host Port on the Front Panel for Quick and Easy Data Storage
• USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or Direct Printing to a PictBridge-compatible Printer
• Optional 10/100 Ethernet Port for Network Connection and Video Out Port to Export the Oscilloscope Display to a Monitor or Projector
• Small Footprint and Lightweight – Only 5.3 in. (134 mm) deep and 7 lb. 14 oz. (3.6 kg)

• 70 MHz Bandwidth Models
• 2 Analog Channel Models
• 1 GS/s Sample Rate on All Channels
• 1 Megapoint Record Length on All Channels
• 5,000 wfm/s Maximum Waveform Capture Rate
• Suite of Advanced Triggers
• Wave Inspector Controls Provide Easy Navigation and Automated Search of Waveform Data
• Automated Serial Triggering, Decode, and Search Options for I2C, SPI, CAN, LIN, and RS-232/422/485/UART
• FilterVu Variable Low-pass Filter Allows for Removal of Unwanted Signal Noise while still Capturing High-frequency Events
• 29 Automated Measurements, and FFT Analysis for Simplified Waveform Analysis
• TekVPI Probe Interface Supports Active, Differential, and Current Probes for Automatic Scaling and Units
• 7 inch (180 mm) Widescreen TFT-LCD Color Display
• USB 2.0 Host Port on the Front Panel for Quick and Easy Data Storage
• USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or Direct Printing to a PictBridge-compatible Printer
• Optional 10/100 Ethernet Port for Network Connection and Video Out Port to Export the Oscilloscope Display to a Monitor or Projector
• Small Footprint and Lightweight – Only 5.3 in. (134 mm) deep and 7 lb. 14 oz. (3.6 kg)

• Memory depth of SDS1000CFL is 24Kpts
• Use Colored TFT LCD, the waveform display is clearer and stable.
• Screen saver function:1 minute to 5 hours
• Dual channel-channel bandwidth: 60MHZ-300MHZ.
• The real time sampling rate is 2GSa/s.
• Trigger Modes: Edge, Pulse, Video, Slope and Alternative trigger modes.
• Unique Digital Filter function and Waveform recorder function
• Pass/Fail function
• hirty two parameters Auto measure function.
• Cursor measure covers Manual mode, Track mode and Auto mode.
• Channel waveform and it’s FFT waveform display on split screen.
• Pop-up Menu display pattern is more convenient for users using it.
• Multiple Language User Interface.
• Support Multilingual online help system.

• Memory depth of SDS1000CFL is 24Kpts
• Use Colored TFT LCD, the waveform display is clearer and stable.
• Screen saver function:1 minute to 5 hours
• Dual channel-channel bandwidth: 60MHZ-300MHZ.
• The real time sampling rate is 2GSa/s.
• Trigger Modes: Edge, Pulse, Video, Slope and Alternative trigger modes.
• Unique Digital Filter function and Waveform recorder function
• Pass/Fail function
• hirty two parameters Auto measure function.
• Cursor measure covers Manual mode, Track mode and Auto mode.
• Channel waveform and it’s FFT waveform display on split screen.
• Pop-up Menu display pattern is more convenient for users using it.
• Multiple Language User Interface.
• Support Multilingual online help system.

• Memory depth of SDS1000CFL is 24Kpts
• Use Colored TFT LCD, the waveform display is clearer and stable.
• Screen saver function:1 minute to 5 hours
• Dual channel-channel bandwidth: 60MHZ-300MHZ.
• The real time sampling rate is 2GSa/s.
• Trigger Modes: Edge, Pulse, Video, Slope and Alternative trigger modes.
• Unique Digital Filter function and Waveform recorder function
• Pass/Fail function
• hirty two parameters Auto measure function.
• Cursor measure covers Manual mode, Track mode and Auto mode.
• Channel waveform and it’s FFT waveform display on split screen.
• Pop-up Menu display pattern is more convenient for users using it.
• Multiple Language User Interface.
• Support Multilingual online help system.

• Memory depth of SDS1000CFL is 24Kpts
• Use Colored TFT LCD, the waveform display is clearer and stable.
• Screen saver function:1 minute to 5 hours
• Dual channel-channel bandwidth: 60MHZ-300MHZ.
• The real time sampling rate is 2GSa/s.
• Trigger Modes: Edge, Pulse, Video, Slope and Alternative trigger modes.
• Unique Digital Filter function and Waveform recorder function
• Pass/Fail function
• Thirty two parameters Auto measure function.
• Cursor measure covers Manual mode, Track mode and Auto mode.
• Channel waveform and it’s FFT waveform display on split screen.
• Pop-up Menu display pattern is more convenient for users using it.
• Multiple Language User Interface.
• Support Multilingual online help system.

• Lab performance in a rugged and portable design
• Models from 60 MHz to 500 MHz with 5 Gsample/s sampling rate
• 2- and 4-channel models
• 50,000 waveforms per second
• High-speed acquisition system with history mode
• 10 bit ADC
• Deep zoom with 500 ksample acquisition memory
• Excellent sensitivity: 2 mV/div to 100 V/div
• Up to 300 V offset range
• 33 automatic measurement functions
• Isolated, CAT IV
• Five instruments in one handheld package
• Lab performance oscilloscope
• Logic analyzer
• Protocol analyzer
• Data logger
• Digital multimeter

• Dimension: 340mm( L) × 155mm( H) × 70mm( W)
• Weight: 1.8kg ( without battery)
• 300MHz with dual channels
• 2.5GS/ s sample rate
• 10M record length for each channel
• Large 8-inch 800×600 pixels display
• Autoscale function
• Pass/ Fail function
• Smart design with easy workplace
• Battery ( optional)
• Multiple interface
• USB
• VGA ( optional)

• Dimension: 340mm( L) × 155mm( H) × 70mm( W)
• Weight: 1.8kg ( without battery)
• 100MHz with dual channels
• 2GS/ s sample rate
• 10M record length for each channel
• Large 8-inch 800×600 pixels display
• Autoscale function
• Pass/ Fail function
• Smart design with easy workplace
• Battery ( optional)
• Multiple interface
• USB
• VGA( optional)

• Bandwidth:  60MHz
• Sample rate(Real time):  500MS/s
• Horizontal Scale(S/div):  5ns/div~100s/div, step by 1~2~5
• Rise time (at input, typical):  ≤5.8ns
• Channels:  Dual
• Display:  8″ color LCD, TFT display , 800*600 pixels, 65535 colors
• Input impedance:  1MΩ±2%in parallel with 15pF±5pF
• Channels Isolation:  50Hz: 100 : 1, 10MHz: 40 : 1
• Max. input voltage:  400V (PK-PK) DC + AC PK-PK
• DC gain accuracy:  ±3%

• 100 MHz
• 2 analog channels
• Troubleshoot in any weather with channel-to-channel isolation and a CAT III 600 V safety rating
• Identify glitches easily with dual window zoom
• View subtle signal details more clearly with up to 1 Gsa/s sampling rate and 120 Kpts memory
• Debug under any lighting conditions with 3 selectable viewing modes (indoor, outdoor and night vision)
• Get 3 instruments in 1: a dual-channel oscilloscope, built-in DMM and data logger
• Easier start-up with 10 selectable languages

• 100 MHz
• 2 analog channels
• Troubleshoot in any weather with channel-to-channel isolation and a CAT III 600 V safety rating
• Identify glitches easily with dual window zoom
• View subtle signal details more clearly with up to 1 Gsa/s sampling rate and 120 Kpts memory
• Debug under any lighting conditions with 3 selectable viewing modes (indoor, outdoor and night vision)
• Get 3 instruments in 1: a dual-channel oscilloscope, built-in DMM and data logger
• Easier start-up with 10 selectable languages

• 3 in 1 Solution: Dual-channel Oscilloscope, True RMS DMM and Real-Time Data Logger
• Large 4.5 inch Color Display
• Up to 40 MHz Scope Bandwidth
• Up to 200 MSa/s Sample Rate
• 125 K Memory Depth
• Advanced triggering modes: edge, pulse, pattern, video
• 22 Automatic scope measurements
• Dual waveform math
• FFT (Model U1604B)
• 6000-Count DMM with 11 measurement functions
• Full remote control and data transfer via PC Link software
• USB 2.0 PC Connectivity
• Three Year Warranty

• 3 in 1 Solution: Dual-channel Oscilloscope, True RMS DMM and Real-Time Data Logger
• Large 4.5 inch Color Display
• Up to 40 MHz Scope Bandwidth
• Up to 200 MSa/s Sample Rate
• 125 K Memory Depth
• Advanced triggering modes: edge, pulse, pattern, video
• 22 Automatic scope measurements
• Dual waveform math
• FFT (Model U1604B)
• 6000-Count DMM with 11 measurement functions
• Full remote control and data transfer via PC Link software
• USB 2.0 PC Connectivity
• Three Year Warranty