Hioki 9661 Clamp On Sensor


Dijual & dikirim oleh: Kucari.com

CAT III 600V

Key Features

• For inverter devices or commercial power lines

• Measure up to 500 A

Rp 4.480.000

Hioki 9661 Clamp On Sensor

hioki 9661 sebuah tang jepit untuk sensor pengukuran load current, sebuah voltage output sensor 500A AC.  Sensor clamp hioki adalah yang terbaik dikelasnya yang digunakan bersamaan dengan power meter dan power quality analyzer. Hioki 9661 ialah sebuah clamp sensor 500A AC dengan voltage output untuk mengukur load current.

RATED MEASUREMENT CURRENT 500 A AC
MAX. MEASUREMENT CURRENT Continuous 550 A (45 to 66 Hz)
OUTPUT RATE 1 mV AC/ A
AMPLITUDE ACCURACY (45 TO 66 HZ) ±0.3% rdg. ±0.01% f.s.
PHASE ACCURACY ±0.5° (45 Hz to 5 kHz)
AMPLITUDE FREQUENCY CHARACTERISTICS Within ±1% at 40 Hz – 5 kHz (deviation from amplitude accuracy)
MAX. RATED VOLTAGE TO EARTH 600 V AC rms or less
MEASURABLE CONDUCTOR DIAMETER φ 46 mm (1.81 in) or less
OPERATING TEMPERATURE AND HUMIDITY 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
DUSTPROOFNESS AND WATERPROOFNESS N/A
DIMENSIONS AND MASS 78 mm (3.07 in)W × 152 mm (5.98 in)H × 42 mm (1.65 in)D, 380 g (13.4 oz)
Cord length 3 m (9.84 ft), Output terminal: BNC
Category: Tag:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Hioki 9661 Clamp On Sensor”

There are no reviews yet.