Mesin & Peralatan Industri
Showing 4417–4464 of 4586 results
-
Electrodes
Hanna HI 4013 Electrode
Hanna HI 4013 Electrode PVC Nitrat Polymer Membran Half-Sel Ion Selektif Elektroda dengan BNC Connector, 3,0-8 pH, 1m Coaxial Kabel
Features:
- Nitrate polymer membrane half-cell ISE
- Made of PVC
- BNC connector
- 0 to 40 degrees C temperature range (32-104 F)
Hanna HI 4013 Electrode adalah ion setengah-sel elektroda selektif Nitrat.
elektroda ini memiliki kabel 1m dan konektor BNC.
Hanna HI 4013 Electrode sangat ideal untuk penentuan nitrat bebas di perairan alami, makanan emulsi dan sampel tanaman
SKU: n/a -
Solution
Hanna HI 4012-21 Solution Standard
Hanna HI 4012-21 Solution Standard 0.1 M 500 mL
Berbagai pilihan kami Standar ISE HANNA dibuat dan botol di fasilitas kita sendiri. Standar ISE diperlukan untuk tindakan langsung dan peningkatan langkah-langkah dan teknik yang tersedia dengan sertifikat analisis.
SKU: n/a -
Solution
Hanna HI 4012-01 Solution Standard
Hanna HI 4012-01 Solution Standard ISE 0.1M Lead Std , 500 ml Bottle”
Hann instrumen menawarkan berbagai solusi untuk elektroda ISE. standar ISE diperlukan untuk metode pengukuran langsung ISE dan incremental. Mereka tersedia untuk berbagai ISE dengan sertifikat parameter analisis.
SKU: n/a -
Test Kit
Hanna HI 700635P Cleaning Solution
Semua penggunaan siap-larutan pembersih yang dibuat dengan kualitas tertinggi bahan dan bahan kimia sesuai dengan standar yang ditetapkan oleh Institut Nasional Standar dan Teknologi (NIST), untuk memastikan kualitas dan akurasi. Juga tersedia dalam botol memblokir cahaya untuk mencegah terhadap degradasi oleh sinar UV yang kompatibel dengan Standar FDA (Food and Drug Administration).
Remember:
- Cleaning is a fast and effective routine which should be performed on a regular basis as a preventative measure against using dirty equipment.
- Always clean the junction and bulb of the electrode
- Always clean your meter, electrode or probe before calibration
- The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, modern pH meters assume that the electrode is clean and will give you a starting point accordingly. So, if you haven’t cleaned your meter, your readings will be inaccurate from the start.
SKU: n/a -
Solution
Hanna HI 700630p Cleaning Solution
Remember:
Cleaning is a fast and effective routine which should be performed on a regular basis as a preventative measure against using dirty equipment.
- Always clean the junction and bulb of the electrode
- Always clean your meter, electrode or probe before calibration
- The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, modern pH meters assume that the electrode is clean and will give you a starting point accordingly. So, if you haven’t cleaned your meter, your readings will be inaccurate from the start.
SKU: n/a -
Electrodes
Hanna HI 6101415 Electrode
Features Hanna HI 6101415 Electrode
- pH electrode for continuous in-line monitoring in industrial applications
- Automatic Temperature Compensation (ATC) provided by three-wire internal platinum Pt100 resistance thermometer for accurate readings in fluctuating temperatures
- Nontoxic polyvinylidene fluoride (PVDF) body for compatibility with food with self-cleaning flat tip sensor and GP (general purpose) glass bulb
- Internal amplifier for a strong low impedance signal from the electrode to the metering system, and operates in pressurized systems up to 87 psi (6 bar)
- Comes with a 15m (49′) cable and has Bayonet Neill-Concelman (BNC) plus lead connector and built-in matching pin to prevent grounding problems
SKU: n/a -
Electrodes
Hanna HI 5414 Reference Electrodes
Hanna HI 5414 Reference Electrodes adalah tubuh kaca, isi ulang, ganda persimpangan, setengah-sel elektroda referensi dengan konektor pisang 4 mm. elektroda ini memiliki persimpangan keramik ganda di luar sel referensi, referensi kalomel, dan konstruksi lengan samping.
Pertimbangan desain ini dibuat untuk digunakan dalam aplikasi yang membutuhkan mengisi terpencil di suhu mulai dari -5 sampai 60 ° C.
SKU: n/a -
Electrodes
Hanna HI 5413 Reference Electrodes
Hanna HI 5413 Reference Electrodes adalah tubuh kaca, isi ulang, tunggal persimpangan, setengah-sel elektroda referensi dengan konektor pisang 4 mm. elektroda ini memiliki persimpangan PTFE lengan dalam sel referensi luar, referensi kalomel, dan dibuat untuk digunakan dalam suhu mulai dari -5 sampai 60 ° C.
Pertimbangan desain ini dibuat untuk pengukuran dalam sampel dengan padatan tersuspensi, dan dapat digunakan dalam berbagai titrasi.
SKU: n/a -
Electrodes
Hanna HI 5412 Reference Electrode
Hanna HI 5412 Reference Electrode adalah tubuh kaca, isi ulang, ganda persimpangan, setengah-sel elektroda referensi dengan konektor pisang 4 mm. elektroda ini memiliki persimpangan keramik tunggal dalam sel referensi dan kalomel referensi luar.
Features Hanna HI 5412 Reference Electrode
- Reference electrode for general purpose, ISE and titrations
- Reference: single, Hg/Hg2Cl2
- Junction/flow rate: Ceramic, single / 15-20 microliter/H
- Electrolyte: KCL 3.5M
- 0.1 bar maximum pressure
SKU: n/a -
Electrodes
Hanna HI 5314 Reference Electrode
Hanna HI 5314 Reference Electrode adalah tubuh kaca, isi ulang, ganda persimpangan, setengah-sel elektroda referensi dengan konektor pisang 4 mm. elektroda ini memiliki persimpangan keramik ganda dalam sel referensi luar dan konstruksi lengan sisi.
Features Hanna HI 5314 Reference Electrode
- Reference electrode for measurements with remote filling
- Reference: double, Ag/AgCl
- Junction/flow rate: Ceramic double
- Electrolyte: KCL 3.5M
- 3 bar with back maximum pressure
SKU: n/a -
Alat Laboratorium, Test Kit
Hanna HI 5313 Reference Electrodes
Features Hanna HI 5313 Reference Electrodes
- Half-cell reference electrode for use with half-cell fluoride ISEs
- Ag/AgCl single-junction reference for general applications
- Ceramic junction for durability
- PEI body resists solvents and is sealed for minimal maintenance
- Electrode is 12mm in diameter and 120mm long, and has a 1m cable with a banana jack connector for attaching to compatible meters
SKU: n/a -
Test Kit
Hanna HI 3897 Olive Oil Acidity Test Kit
Features at-a-glance
-
Complete testing setup
-
All required materials are included with the test kit, such as the one-time-use solvent bottles, titrant solution, calibrated syringe, and magnetic stirrer.
-
-
High resolution
-
Readings from 0.00 to 1.00% acidity are determined to 0.01% (0.01 mL) resolution.
-
-
Replacement reagents available
- There is no need to buy a new kit when reagents are exhausted. A new reagent kit containing titrant solution and organic solvent bottles for 10 tests can be ordered individually.
SKU: n/a -
-
Test Kit
Hanna HI 3896bp Backpack Lab Soil Quality
Features Hanna HI 3896bp Backpack Lab Soil Quality
- Agriculture combination test kit for testing nitrogen, phosphorus, potassium (N,P,K) with enough materials for 50 tests of each parameter
- 48-page teachers manual with a curriculum that meets National Science Teachers Association Standards
- HANNA’s pHep4 waterproof pH/temperature tester
- Parameter summary in pdf and powerpoint format (on included CD).
- HANNA’s DiST5 waterproof conductivity/total dissolved solids (TDS) tester
- Laminated, laboratory instruction cards with step-by-step field test procedures
- HANNA’s HI 145 digital thermometer
- Reproducible lab activity worksheets with instructions, goals, hypothesis and testing procedure results/observations
- Backpack carrying case which holds all components of the kit
- A glossary of key terms in pdf format (on included CD)
SKU: n/a -
-
Alat Laboratorium, Test Kit
Hanna HI 3896 NPK Soil Chemical Test Kit
Hanna HI 3896 NPK Soil Chemical Test Kit adalah test kit kimia untuk penentuan parameter umum dipantau dalam pengujian tanah. Dengan menggunakan Uji Tanah Kit Hanna, adalah mungkin untuk mengukur pH dan unsur-unsur yang paling penting untuk pertumbuhan tanaman: nitrogen (N), fosfor (P), dan kalium (K) kit .Ini dilengkapi dengan semua reagen yang diperlukan dan peralatan untuk melakukan lebih dari 25 tes untuk setiap parameter.
Features at-a-glance
- Complete setup
- All required materials are included with the test kit, such as the test tubes, spoon, brush, color comparison cards, reagents, solutions, and handbook.
- Replacement reagents available
- There is no need to buy a new kit when reagents are exhausted. The reagents for each parameter can be ordered individually.
SKU: n/a - Complete setup
-
-
Test Kit
Hanna HI3822-100 Sulfite Test Kit 110 tests
Hanna HI3822-100 Sulfite Test Kit 110 tests adalah reagen berkualitas tinggi yang pra-diukur, memungkinkan bagi pengguna untuk mencapai pengukuran alkalinitas cepat dan akurat dengan test kit kimia. Reagen ini mengikuti metode titrasi iodometri untuk menentukan konsentrasi sulfit.
features Hanna HI3822-100 Sulfite Test Kit 110 tests
• Pre-made reagents for ease of use
• Prepared with high purity chemicals
• Marked with expiration date and lot number for traceabilitySKU: n/a -
Test Kit
Hanna HI3822 Sulfite test kit
Features at-a-glance
- Complete setup
- All required materials are included with the test kit, such as the sample beakers, indicator and reagent bottles, and calibrated syringe.
- High resolution
- Readings from 0 to 20 mg/L are determined to 0.2 mg/L resolution.
- Readings from 0 to 200 mg/L are determined to 2 mg/L resolution.
- Replacement reagents available
- There is no need to buy a new kit when reagents are exhausted. The HI3822-100 can be ordered to replace the reagents supplied with the kit.
SKU: n/a - Complete setup
-
Test Kit
Hanna HI-3821 Cooling & Boiler test kit
Features at-a-glance
-
Complete setup
-
All required materials are included with the test kit, such as the dissolved oxygen glass bottle, sample beaker, indicator and reagent bottles and packets, and color comparison cube.
-
-
High resolution
-
All tests provide a high resolution based on the expected range of measurement.
-
-
Replacement reagents available
-
There is no need to buy a new kit when reagents are exhausted. The reagents for each parameter can be ordered individually.
-
SKU: n/a -
-
Test Kit
Hanna HI 3820 Acidity Test Kit
Features at-a-glance
-
Complete setup
-
All required materials are included with the test kit, such as the sample beaker, indicator and reagent bottles, and calibrated syringe.
-
-
High resolution
-
Readings from 0 to 100 mg/L are determined to 1 mg/L resolution.
-
Readings from 0 to 500 mg/L are determined to 5 mg/L resolution.
-
-
Replacement reagents available
-
There is no need to buy a new kit when reagents are exhausted. The HI3820-100 reagent set can be ordered to replace the reagents supplied with the kit. This replacement reagent set comes with a 10mL dropper bottle of dechlorinating reagent, a 10mL dropper bottle of the bromophenol blue indicator, a 10mL dropper bottle of phenolphthalein indicator, and a 120mL bottle of HI3820-0 reagent.
-
SKU: n/a -
-
Test Kit
Hanna HI 3818-100 Carbon Dioxide CO2
Features Hanna HI 3818-100 Carbon Dioxide CO2
- Titration is used to find the concentration of an identified chemical in a solution (e.g., water).
- In our standard Titration kits, there will be a Titrant solution that is added to the solution (e.g., water) to be tested to make it change colour. When colour change is achieved, under careful conditions – usually using a burette – the reagent is added, drop by drop, until the solution turns clear. The user will then count how many drops of reagent were used to achieve complete colour dispersal. The number of drops used will determine the chemical concentration and results can be found in the manual included.
SKU: n/a -
Test Kit
Hanna HI-38000 Sulphate test kit
features Hanna HI-38000 Sulphate test kit
- Titration is used to find the concentration of an identified chemical in a solution (e.g., water).
- In our standard Titration kits, there will be a Titrant solution that is added to the solution (e.g., water) to be tested to make it change colour. When colour change is achieved, under careful conditions – usually using a burette – the reagent is added, drop by drop, until the solution turns clear. The user will then count how many drops of reagent were used to achieve complete colour dispersal. The number of drops used will determine the chemical concentration and results can be found in the manual included.
- While not offering the levels of accuracy or range an electronic meter can offer, Chemical Test Kits do provide a low cost and easy way to determine chemical presence in water. (Titration is also known as Titrimetry and Volumetric Analysis).
- Go to the Chemical Test Kit tab at the top of our webpage for the full range of testing kits and reagents available.
SKU: n/a -
-
-
Electrodes
Hanna HI 36180 Digital ORP Electrode
Hanna HI 36180 Digital ORP Electrode adalah badan kaca, ganda persimpangan, refillable ORP elektroda dengan sensor suhu built-in untuk pengukuran suhu kompensasi. elektroda ini memiliki persimpangan keramik tunggal dan ORP penginderaan pin dibuat dengan platinum.
SKU: n/a -
Calibration
Hanna Hanna HI 3512-02 Calibration
features Hanna Hanna HI 3512-02 Calibration
- Up to five point pH calibration with seven standard buffers
- Up to five point ISE calibration with six standard solutions
- 0.001 pH resolution
- GLP features
- Automatic Temperature Compensation
- PC interface via USB
- Log on demand of up to 400 samples
SKU: n/a -
Electrodes
Hanna HI 2004-1015 ORP electrode
features Hanna HI 2004-1015 ORP electrode
- Self-cleaning flat tip sensor
- Significantly reduced maintenance requirement
- Models especially designed for plating baths
- PVDF body
- Three junction types: ceramic, PTFE and open
- Built-in potential matching pin
- Three different glass type pH sensors
- ORP electrodes with platinum or gold sensor
- Models with built-in Pt100 or Pt1000 temp. sensor
- Internal amplifier models powered by the process controller
- 3/4″ NPT external thread on both ends for easy installation
SKU: n/a -
Electrodes
Hanna HI 2004-1010 ORP electrode
features Hanna HI 2004-1010 ORP electrode
- Self-cleaning flat tip sensor
- Significantly reduced maintenance requirement
- Models especially designed for plating baths
- PVDF body
- Three junction types: ceramic, PTFE and open
- Built-in potential matching pin
- Three different glass type pH sensors
- ORP electrodes with platinum or gold sensor
- Models with built-in Pt100 or Pt1000 temp. sensor
- Internal amplifier models powered by the process controller
- 3/4″ NPT external thread on both ends for easy installation
SKU: n/a -
Electrodes
Hanna HI-2004-1005 ORP electrode
features Hanna HI-2004-1005 ORP electrode
- Self-cleaning flat tip sensor
- Significantly reduced maintenance requirement
- Models especially designed for plating baths
- PVDF body
- Three junction types: ceramic, PTFE and open
- Built-in potential matching pin
- Three different glass type pH sensors
- ORP electrodes with platinum or gold sensor
- Models with built-in Pt100 or Pt1000 temp. sensor
- Internal amplifier models powered by the process controller
- 3/4″ NPT external thread on both ends for easy installation
SKU: n/a -
DO Meter
Hanna HI 2004-02 edge Dissolved Oxygen Meter
features Hanna HI 2004-02 edge Dissolved Oxygen Meter
- Clark type polarographic probe with replacement membrane cap
- Ranges: 0.00 – 445.00 mg/L (ppm); 0.0 – 300% oxygen saturation
- Accuracy ± 1.5% full scale
- Calibration at 1 or 2 points 0% and 100% (air)
- Automatic temperature compensation from 0 to +50°C
- GLP data – records date, time, calibration standards, altitude value and salinity value
- Altitude compensation -500 to 4000 metres
- Salinity compensation 0 to 40g/L
- Large 140mm LCD display with clear full text readout
- Capacitive touch keys
- Digital smart electrodes enable edge to automatically recognise and store sensor type, ID and calibration information
- Programmed for basic and advanced modes
- Log-on demand and interval logging
- PC interface via micro USB
- Data download onto USB stick via standard USB
- GLP data automatically transferred
- 2 USB ports
- Easy plug-in 3.5mm connector
- Slim and lightweight, edge can be hand-held or wall mounted with supplied bracket
SKU: n/a -
DO Meter
Hanna HI 2004-01 edge Multiparameter DO Meter
features Hanna HI 2004-01 edge Multiparameter DO Meter
- Specialized equipment specialized for DO measurement
- White color with a sense of cleanliness that is also suitable for the food industry
- Compact thin and light tablet type
- Multipurpose and practical shape
- Measuring range up to 0.00 to 45.00 mg / L (ppm)
- Adopt a small diameter electrode with a diameter of 12 mm
- Up to 1000 data can be saved
- Data can be saved using USB and transferred to PC
SKU: n/a -
-
-
Conductivity Meter
Hanna HI 2003-02 edge Conductivity
features Hanna HI 2003-02 edge Conductivity
- 4-ring potentiometric probe – covers all ranges from 0.00µS/cm to 500 mS/cm (absolute EC)
- Accuracy – ±1% of the reading (±0.05µS/cm or 1 digit, whichever is greater)
- Calibration – offset (0 µS/cm) and cell factor calibration, choice of 5 standards
- Auto-ranging or manual range selection
- EC, TDS and Salinity reading modes
- Temperature compensation – automatic, NoTC (absolute)
- GLP data – records date, time, offset, and cell constant value (K)
- Adjustable EC to TDS conversion factor
- Adjustable temperature correction factor
- Capacitive touch keys
- Large 140mm LCD display with clear full text readout
- Digital smart electrodes enable edge to automatically recognise and store sensor type, ID and calibration information
- Programmed for basic and advanced modes
- Log-on demand and interval logging
- PC interface via micro USB
- Data download onto USB stick via standard USB
SKU: n/a -
Calibration
Hanna HI2223-01 Calibration
Features Hanna HI2223-01 Calibration
- pH Calibration Check™
- On-screen electrode condition and response time
- Up to five point calibration with seven standard buffers
- Diagnostic alerts through icons
- Automatic Temperature Compensation
- Log up to 500 samples
- GLP features
- PC interface via US
SKU: n/a -
Electrodes
Hanna HI 1006-2505 PH-Electrode
Features Hanna HI 1006-2505 PH-Electrode
- Self-cleaning flat tip sensor
- Significantly reduced maintenance requirement
- Models especially designed for plating baths
- PVDF body
- Three junction types: ceramic, PTFE and open
- Built-in potential matching pin
- Three different glass type pH sensors
- ORP electrodes with platinum or gold sensor
- Models with built-in Pt100 or Pt1000 temp. sensor
- Internal amplifier models powered by the process controller
- 3/4″ NPT external thread on both ends for easy installation
SKU: n/a -
Electrodes
Hanna HI 1006-2305 PH-Electrode
Features Hanna HI 1006-2305 PH-Electrode
- pH electrode for continuous in-line monitoring in industrial applications
- Polytetrafluoroethylene (PTFE) junction for longer electrode life and Automatic Temperature Compensation (ATC) provided by three-wire internal platinum Pt100 resistance thermometer for accurate readings in fluctuating temperatures
- Nontoxic polyvinylidene fluoride (PVDF) body for compatibility with food with self-cleaning flat tip sensor and GP (general purpose) glass bulb
- 3/4″ National Pipe Thread Tapered Thread (NPT) external thread on both ends for ease of installation, and operates in pressurized systems up to 87 psi (6 bar)
- Comes with a 5m (16.4′) cable and has direct wire connector for tight cable connections and built-in matching pin to prevent grounding problems
SKU: n/a