Moisture Meter TK100S
Alat ukur kadar air pada jagung, gandum, beras, kacang, tepung terigu.

Spesifikasi :

• Tampilan: 4 digital LCD
• Rentang pengukuran: 5-35%
• Suhu: 0-60
• Kelembaban: 5% -90%
• Resolusi: 0.1
• Akurasi: 0.5% n
• Metode Operasi: Electrical Resistance Method, Automatic temperature Compensation
• Power: 4x batere AAA
• Dimensi : Panjang 75cm Lebar 15cm
• Berat bersih: 203 gram

• Model LG Drywall Moisture Meter Features
• Lightweight for easy portability and one-hand operation when checking moisture distribution in drywall and plasterwork.
• Direct reading moisture scale plus “Dry”, “OK” and “Wet” color codes.
• Allows moisture comparisons between kiln decks.
• Tests 1/4″(6.4 mm) to 3/4″ (1.9 cm) thick wallboard and plasterwork.
• Patented RF Power-Loss Absorption Principal.

• Auto-Ranging Digital Display reads in the 5 to 25 percent moisture content range.
• Microprocessor based with large LCD display for easy reading.
• Pocket size and weighs less the one pound.
• Complete with 9 volt Battery, Manual and Probe.
• Calibration Standard and CORDURA® Carry Case available separately.

Sudah yakin dengan produk ini? Klik Tombol “Beli Sekarang”
*Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu

Anda Perusahaan butuh penawaran harga resmi? Klik tombol “Penawaran Harga

• Battery Included
• Shock Resistant Carrying Case with Belt Clip Included
• Operating Temperature 30-110 ° Fahrenheit
• Stores up to 50 Readings

• Size & Weight: Length – 4 9/16″; Width – 2 3/4″; Height – 1 1/16″; Weight – .37 lbs
• Power: 9 volt battery Auto Power Shut Down – 60 seconds
• Control: Two button control for on/off and material settings Press & Hold feature
• Depth of Measurement: 3/4″
• Moisture Content: Relative 5 – 30
• Scanning Area: 1 1/2″ x 2 1/2″
• Material Setting: Selectable setting .20 – 1.0
• Calibration: Verifiable at factory

• Hygromaster2 with short QuikStick
• Infra-red non-contact surface temperature
• Psychometric Calculations
• Data logging
• Simple to use interface with color display
• Fast temperature and humidity response
• Replaceable humidity and temperature sensor
• Highly accurate

• (1) POL4750 HygroStick
• (1) BLD7759 Cable
• (1) Set 9V Batteries
• (1) Carrying Case

• Non-invasive measurement up to 3/4″ (20mm) below the surface
  Detects moisture directly in materials and below wall and floor coverings such as tile, wood and vinyl
  Not adversely affected by surface moisture such as condensation
• Large backlit LCD Display
• Color changing LEDs shows moisture condition green (dry), yellow (at risk) and red (wet)
• Adjustable auto off
• Audible tone
• Hold feature
• 1-year warranty

• Dimension : 120 x 60 x 25 mm
  Weigh : 150 g
  Scanning Depth : 5 – 8 mm
• Sensor Dimension : 67 x 42 mm
• Measuring Range : 4% – 99%
• Density Range : 370 – 670 kg/ m³
• Timber Group : 1 – 6
• Density Range : 370 – 670 kg/ m³
• Power Supply : 9V Battery or NiCd Akku

• Dimension : 120 x 60 x 25 mm
• Weigh : 150 g
• Scanning Depth : 25 – 40 mm
• Sensor Dimension : 80 x 72 mm
• Measuring Range : 4% – 99%
• Density Range : 370 – 670 kg/ m³
• Timber Group : 1 – 6
• Density Range : 370 – 670 kg/ m³
• Power Supply : 9V Battery or NiCd Akku

• Dimension : 120 x 60 x 25 mm
• Weigh : 150 g
• Scanning Depth : 13 – 20 mm
• Sensor Dimension : 78 x 45 mm
• Measuring Range : 4% – 99%
• Density Range : 370 – 670 kg/ m³
• Timber Group : 1 – 6
• Density Range : 370 – 670 kg/ m³

• Measuring  Range    5-60% dependent upon species setting*
• Display    0.1% resolution for the entire range.
• Species Corrections      71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100)
• Gypsum Scale    N/A
• Reference Scale     0-99 for non-wood building materials

• Measuring Range: 6-45%
• Resolution: 0.1% for values below 10% and 1% steps above 10%
• Species Corrections:  2 settings for wood species corrections with LED indicator
• Calibration Check:  The calibration is internally checked and automatically adjusted if necessary
• Pins:  2 pair of pins, measuring depth of 3/ 16″ and 7/ 16″ ( 5, 10mm)
• Size: 2-3/ 4″ x5″ x1″ ( 70x140x25mm)
• Weight:  8 ounces ( 200g)

digital moisture meter comes with 42 settings to correct for:

• – domestic and tropical wood species
• – horizontal, vertical and strand bamboo
• – laminates and panel products
• – gypsum and drywall (*same as mini-Ligno S/D and mini-Ligno S/DC)
• – reference scale for concrete and other building materials.*

• Technical characteristics
• Suggested testing range: 5-35%
• Number of ranges: 7
• Reading depth* : 1-3 cm
• Power supply: 9V 6F22
• Battery Autonomy: 60h approx
• Size: 148x59x25 mm Weight: 200gr

• Technical characteristics
  Suggested testing range: 5-40%
• Ranges number ( wood) : 7
• Ranges number ( building materials) : 5
• User-programmable ranges: 7
• Temperature indicator: -10/ 50C
• Reading depth* : 1-2 cm
• Power supply: 9V 6F22 battery

• Full List of Products Included
• Extech MO280 Pinless Moisture Meter
• Carrying Case
• Instruction Manuals
• 9V Battery

• Detachable sensors transmit data to the display that can be viewed from a remote location up to 65ft (20m) from the measurement point
• Connect to multiple sensors on individual channel
• Trending Mode with graphical representation of live reading for fast scanning of large areas
• Wireless sensor affixes to telescoping handle (4ft/1.2m) for measurements in ceilings or in hard to reach areas; Optional 9.8ft (3m) and 16.4ft (5m) handles available
• %WME (wood moisture equivalent) pin moisture reading
• Visual and audible High/Low alarm modes