Kyoritsu 8035 Phase Rotation
New technology permits safe testing, without the need of direct contact between probes and live wires.
• The insulated crocodile clips can clip insulated cables from φ2.4 to 30mm.
• Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
• The instrument can be fixed to a metal panel via the magnet on the back side.
• Wide measuring range for 3 phase installations from 70V to 1000V AC.
• Super brightness function permits clear LED’s indication also in sunshine.
• Complies with IEC 61010-1 CAT IV 600V and CAT III 1000V.
|Functions||Phase rotation (Clockwise or Counter Clockwise),
Presence of open phase
|Detection method||Electrostatic induction|
|Measuring voltage range||From 70 to 1000V AC phase to phase (sine wave, continuous input)|
|Clamp diameter range||From Ø2.4 to 30mm insulated cables|
|Measuring frequency range||45 to 66Hz|
Green arrow LEDs “rotate” in clockwise, Green symbol “CW” lits, Intermittent buzzerCounter Clockwise:
Red arrow LEDs “rotate” in counter clockwise, Red symbol “CCW” lits, continuous buzzer
|Visual indication||Via LEDs with Super brightness function|
|Battery voltage warning||Power LED blinks if battery voltage is too low.|
|Test leads||Double insulated cables, length approx. 70cm|
|Colours code||L1(U): RedL2(V): WhiteL3(W): Blue|
|Applicable standards||IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree2,
IEC 61326-1, IEC 61557-1, -7
|Operating temperature & humidity range||Temperature/Humidity Ranges -10 to 50ºC, 80% (no condensation)|
|Storage temperature & humidity range||Temperature/Humidity Ranges -20 to 60ºC, 80% (no condensation)|
|Power supply (DC battery)||LR6(AA)(1.5V) ×4
* Continuous use: Approx. 100 hours (Auto power off in about 10 min.)
|Dimensions||112(L) × 61(W) × 36(D) mm|
|Included Accessories||9096 (Carrying case), LR6(AA) × 4, Instruction manual|