LUTRON WA-300 Pure Water Tester

Brands:Lutron

Dijual & dikirim oleh: Darma Sakti Adiperkasa, CV

 

Features Pocket size, separate probe.

  • Easy carry out & operation.
  • Display 13 mm, 3 1/2 digit
  • Measurement 0 to 1999 uS.

* uS – micro Simens.

  • Resolution 1 uS.
  • Accuracy ± (4 % + 3 d), * 23± 5 ℃.
  • Compensation 0 to 50 ℃ ( 32 to 122 ℉).
  • Dimension Main instrument:131 x 70 x 25 mm
  • Sensor probe:Round, 22 mm Dia., 120 mm length.

LUTRON WA-300 Pure Water Tester

quality of the water is getting much more concerned by the human being and it
also an important factor in the industrial sectors, laboratories or other fields. It may cause several diseases if home drink water existing high conductivity & contain
impurities, the Pure Water Tester ( Water Quality Tester) are designed to check the
purity of water (water conductivity) also can determine the condition of the ” Water
Filter ” easily and rapidly. Tester is used to measure the conductivity value (ranging from 0 – 2000 uS) which
can therefore judge whether water is pure or not. The conductivity value will become
lower if there is much less impurities existed in water (for example, distilled water that its purity is higher than others will get a lower conductivity value of approx. < 10 uS).

Many people always take many kinds of procedures on water treatment by install
the different kinds of equipment, such as filter or purifier to improve the quality of
water. However, most of people do not know whether the procedures or filter is
effective and can con- tribute to the quality of water. General speaking, the
impurities will be filtered out if the water process procedures attain the expected
result, thus we can use this instrument to measure the conductivity value of purified
water and to judge the effect of the filter (or water process procedures).

Features Pocket size, separate probe.

  • Easy carry out & operation.
  • Display 13 mm, 3 1/2 digit
  • Measurement 0 to 1999 uS.

* uS – micro Simens.

  • Resolution 1 uS.
  • Accuracy ± (4 % + 3 d), * 23± 5 ℃.
  • Compensation 0 to 50 ℃ ( 32 to 122 ℉).
  • Dimension Main instrument:131 x 70 x 25 mm
  • Sensor probe:Round, 22 mm Dia., 120 mm length.

Standard Accessories :

  1. Operation Manual
  2. Battery 9 Volt
  3. Sensor probe 1 PC.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LUTRON WA-300 Pure Water Tester”

There are no reviews yet.