Contact Voltage Tester Fluke 1AC II
Rp 650.000 *Inc. PPN
Penguji tegangan non-kontak 1AC II portabel dari Fluke mudah digunakan – cukup sentuh ujungnya ke strip terminal, stopkontak, atau kabel suplai.
Related Products
Penguji tegangan non-kontak 1AC II portabel dari Fluke mudah digunakan – cukup sentuh ujungnya ke strip terminal, stopkontak, atau kabel suplai. Saat ujungnya menyala merah dan unit berbunyi bip, Anda tahu ada tegangan. Teknisi listrik, pemeliharaan, servis, personel keselamatan, dan pemilik rumah dapat dengan cepat menguji sirkuit berenergi di tempat kerja atau di rumah dan bahkan mendeteksi kesalahan kabel pada stopkontak.
FITUR
- Mode Audible/Silent untuk menambah kenyamanan di lingkungan yang tenang
- Tombol on / off
- Baterai termasuk
SPESIFIKASI
Specifications: Fluke 1AC II Non-Contact Voltage Tester
| Specifications | |
| Operating Principles | Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
| Voltage sensing ranges | Nominally, 90 V AC to 1000 V AC |
| Detector tip style | Flat-tip |
| Light source | One high intensity red LED |
| Agency Approvals | |
| Safety | IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V |
| EMC | IEC 61326-1: Portable |
| IP Rating | IP 40 |
| Operating Temperature | -10°C to 50°C (-14°F to 122°F) |
| Operating Humidity Ranges | 0% to 95% (0°C to 30°C) |
| 0% to 75% (30°C to 40°C) | |
| 0% to 45% (40 to 55°C) | |
| Operating Altitude | 3000 m |
| Cleaning | Clean with damp cloth |
| Batteries | 2 AAA alkaline batteries included |
| Battery Life | Typical battery life of greater than 1 year |
There are no reviews yet.