EUTECH PCD650 pH/mV/Ion/Cond/TDS/Salinity/DO/°C/°F Meter

EUTECH PCD650 pH/mV/Ion/Cond/TDS/Salinity/DO/°C/°F Meter top-of the-line waterproof meter offers features that are typically found on much more expensive models. The IP67-rated housing allows use in dirty and wet environments without harm to the meter.

Datalog up to 500 points with time-and-date stamp. User-selectable “ calibration due” alarms, automatic or manual standards recognition, and single or multiple calibration points provide flexibility in meeting your data quality objectives. Infrared ( IrDA) wireless technology lets you easily download data— no need for additional cords. The large backlit LCD shows the measured value, measured units, temperature, time, battery life, and menu options.

pH range is from – 2.000 to 20.000 with accuracies up to ± 0.002. The pH calibration capabilities include up to six calibration points, a user-settable “ calibration due” alarm, and up to 15 buffer options with auto-buffer recognition of USA, NIST, DIN, and PWB standards.

Meter measures conductivity ( up to 500 mS) , TDS, salinity, or resistivity with either a 2-or 4-electrode conductivity cell. Linear or pure-water temperature compensation curve provides accurate data at all levels of conductivity. Also features set point alarms to indicate when concentrations are outside of programmed limits

Meter determines oxygen saturation up to 600% and concentration up to 90 mg/ L. The galvanic dissolved oxygen probe does not require any warm-up time so you can take readings immediately. Salinity correction is automatically compensated for after manual input of concentration. Barometric pressure is automatically compensated for by the included barometer.

Features : 

Expanded range, resolution, and accuracy, plus increased memory and advanced communications!
No more excuses for missing data! Out-of-date or unperformed calibrations are now things of the past!
Don’ t waste time looking for those cables!
Use in dirty and wet environments

Specifications : 

Resolution: 0.1/ 0.01/ 0.001 pH, 0.1 mV, 2 or 3 digits Ion, 0.05% full scale CON/ Resistivity/ TDS/ Salinity, 0.01 mg/ L
Accuracy: ± 0.002pH, ± 0.2 mV, 0.5% FS ( monovalent) ; 1% FS ( divalent) Ion, ± 1% full-scale CON/ Resistivity/ TDS/ Salinity, ± 0.1% / ± 0.01 mg/ L
Units of Measurement: -2.000 to 20.000 pH, ± 2000 mV, 0.001 to 19, 900 ppm, molar, or mg/ L, 0 to 500 mS CON, 0 to 20.000 Mµ , 0 to 500 ppt TDS, 80 ppt ( Salinity) , 0 to 600% or 49.49 mg/ L
ATC: Yes ( 0 to 100° C)
Operating Modes: pH, ORP, CON, ION, TDS, Resistivity, Salinity, DO

Includes :

” All-in-One ” probe, conductivity probe, dissolved oxygen probe, calibration standards ( 60mL each of pH 4.01, pH 7.00, 1413µ S/ cm, 12.88 mS solution) , rubber boot, multiprobe holder, hard carrying case, and batteries.