EXTECH MS6100 Handheld Digital Oscilloscope

EXTECH MS6100 Handheld Digital Oscilloscope features a one touch setup that optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform. The Waveform Recorder captures/replays input waveforms from CH1 and CH2 with a maximum record length of 1000 frames. The multimeter includes a built-in 6,000 count True RMS MultiMeter with analog bargraph, easy-to-use pop-up menu, a built-in multi-language system, and  23 automatic measurements.

Waveform Math can add, subtract, multiply and divide, and can store and recall up to 1000 waveform screens and setups using the installed 2G microSD card. It includes automatic cursor tracking measurements with a pass-fail function that compares a stored waveform to an unknown input. The built-in FFT function also converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.

Specifications :

Sample rate per channel: 500MS/s
Record length: 1M points per channel
Display size: 5.6″ (142mm) color LCD; 640 x 480 pixels
Channels: 2
Vertical sensitivity: 2mV/div to 5V/div
Vertical resolution: 8 bits
Glitch capture: Yes
Sample mode: normal, average, peak detect
Trigger modes: edge, pulse, alt, video, slope
Trigger source: CH1, CH2
Trigger coupling: AC, DC, LF, HF, noise reduction
Input impedance: 1MΩ/20pF
Max input voltage: 300V (peak)
Cursor measurement: voltage and time; delta (CH1-CH2)
AC voltage: 60mV, 600mV, 6V, 60V, 600V
DC voltage: 60mV, 600mV, 6V, 60V, 600V, 800V
AC/DC current: 60mA, 600mA, 10A
Resistance: 600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
Capacitance: 5nF to 400μF
Diode and continuity: Yes
Power supply: 3 hours Li-ion rechargeable battery; AC charger
Dimensions/Weight: 9.6 x 6.4 x 2″ (245 x 163 x 52mm) / 2.6lbs (1.2kg)