HIOKI 3665-20 LAN Cable Hi Tester

HIOKI 3665-20 LAN Cable Hi Tester Identify the 3 most important criteria for proper networking at a glance, Wire map check : Detect split pairs with wiring check. Cable length : Get NVP-Enhanced measurement accuracy

Basic specifications :

• Measurable cable Twisted-pair cable
• 100ohm characteristic impedance, shielded and unshielded,
• CAT 3, 4, 5, 5e and 6
• Compatible connectors RJ-45 plugs
• WireMap check Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690
• Detectable errors : open, short, reversed, transposed, split pairs and other miswiring
• Cable length check Measurable lengths: 2 to 300 m, 6.6 to 984 ft
• Measurement accuracy : ± 4% rdg. ± 1 m, ± 4% rdg. ± 3.3 ft
• Display resolution : 0.1 m, 0.3ft
• Direction check Up to 21 cables can be identified using the supplied TERMINATOR 9690 and optional Models 9690-01 to 9690-04
• Display 128 x 64 dot matrix LCD ( with backlight)
• Functions Auto Backlight: pressing a button turns the backlight on ( it turns off automatically after about 20 seconds)
• Beeper : sounds when pressing buttons and when measurement results are displayed
• Energy Saving Mode : enter into energy-saving mode after measurement ( and resume when the TEST button is pressed)
• Auto Power Save : the 3665-20 turns off automatically about 10 minutes after the last button press
• Battery Check : Battery indicator blinks when voltage falls below 2.4 V
• Unit Switch : Select between meters or feet
• Power supply : Two AA-size ( LR6) alkaline batteries 1.4VA Approx. 50 hours
• Dimensions, mass Approx. 85 W x 130 H x 33 D mm, approx. 160 g
• Accessories TERMINATOR 9690 ( 1)
• CARRYING CASE( 1) ( Stores the HiTESTER 3665-20 and TERMINATORs 9690)