Hioki PW3365-20 Clamp On Power Logger


  • Voltage ranges: 400 V AC
  • Power ranges: 200.00 W to 6.0000 MW (Depends on voltage/current combination and measured line type)
  • Voltage Accuracy: +/- 1.5% rdg. +/- 0.2% f.s (combined accuracy with PW3365-20 + PW9020)
  • Current Accuracy: +/- 0.3% rdg. +/- 0.1% f.s. + clamp sensor accuracy
  • Active power Accuracy: +/- 2.0% rdg. +/- 0.3% f.s. + clamp sensor accuracy (at power factor = 1)
  • Measure between 90V to 520V in a single 400V range
  • Broadly applicable for many jobs, including leakage current measurement (an optional clamp-on leakage sensor supports measurements as low as 50 mA)
  • Store months of data on SD cards
  • The QUICK SET function guides you in making the right connections

Rp41.124.000

Hioki PW3365-20 Clamp On Power Logger mengambil keamanan dan kenyamanan satu langkah lebih jauh dengan menjadi pertama di dunia non-logam listrik kontak meter yang menggunakan klip tegangan sepenuhnya tertutup yang dapat dilampirkan ke setiap bagian dari kabel atau busbar. Pelanggan sekarang dapat memantau kebutuhan daya dan parameter kekuatan lain untuk membantu dalam audit energi dan memvalidasi langkah-langkah penghematan energi tanpa risiko kecelakaan arus pendek, gangguan listrik, atau cedera karena electrocutions.

Features Hioki PW3365-20 Clamp On Power Logger

  • Voltage ranges: 400 V AC
  • Power ranges: 200.00 W to 6.0000 MW (Depends on voltage/current combination and measured line type)
  • Voltage Accuracy: +/- 1.5% rdg. +/- 0.2% f.s (combined accuracy with PW3365-20 + PW9020)
  • Current Accuracy: +/- 0.3% rdg. +/- 0.1% f.s. + clamp sensor accuracy
  • Active power Accuracy: +/- 2.0% rdg. +/- 0.3% f.s. + clamp sensor accuracy (at power factor = 1)
  • Measure between 90V to 520V in a single 400V range
  • Broadly applicable for many jobs, including leakage current measurement (an optional clamp-on leakage sensor supports measurements as low as 50 mA)
  • Store months of data on SD cards
  • The QUICK SET function guides you in making the right connections

Specifications Hioki PW3365-20 Clamp On Power Logger

Measurement line & number of circuits 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
Measurement items Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power, apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand
Voltage ranges 400 V AC (Effective measurement range: 90.0 V to 520.0 V)
Current ranges 500.00 mA to 5.0000 kA AC (depends on current sensor in use),
50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
Power ranges 200.00 W to 6.0000 MW (depends on voltage/current combination and measured line type)
Basic accuracy Voltage : ±1.5% rdg. ±0.2% f.s(combined accuracy with PW3365-20 + PW9020)
Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
Active power : ±2.0% rdg. ±0.3% f.s. + clamp sensor accuracy (at power factor = 1)
Display update rate 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
Save destination SD Memory card, or internal memory at real time
Data save interval 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
Save items Measurement value save: Average only / Average, Maximum, Minimum value
Screen copy: BMP form (saved every 5 min. at minimum interval time)
Waveform save: Binary waveform data
Interfaces SD memory card
HTTP server function, remote settings via communication program, data download
USB 2.0: When connected to a PC, the SD Card and internal memory are recognized as removable storage devices, remote settings via communication program, data download
Pulse output: proportional to active power consumption when measuring integral power consumption, Isolated open-collector signal
Functions Connection check, Quick Set navigation guide, clock
Power supply AC adapter Z1008: (100 to 240 V AC, 50/60 Hz), 45 VA (including AC adapter)
Battery pack 9459: (DC 7.2 V, 3 VA, charging time 6 hr 10 m), 5 hours of continuous use (with back light off)
Dimensions and mass 180 mm (7.09 in)W × 100 mm (3.94 in)H × 48 mm (1.89 in)D, 540 g (19 oz) without PW9002
180 mm (7.09 in)W × 100 mm (3.94 in)H × 68 mm (2.68 in)D, 820 g (28.9 oz) with PW9002
Accessories Safety Voltage Sensor PW9020 ×1 set, AC adapter Z1008 ×1, USB cable ×1, Instruction manual ×1, Measurement guide ×1, Color spiral tubes ×1 set: red, yellow, blue/four each, Spiral tubes for grouping clamp sensor cords ×10

 

 

Jual Hioki PW3365-20 Clamp On Power Logger dengan harga murah, diskon dan cari produk Hioki lainnya dari kategori Clamp Meter. Gratis biaya pengiriman untuk wilayah Jakarta dan dapat dikirim ke seluruh Indonesia. Dapatkan hanya di toko online Kucari.com, belanja online mudah dan aman.

Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Hioki PW3365-20 Clamp On Power Logger”

*

There are no reviews yet.