Icom IC-FR6200H
Login lihat harga
Icom IC-FR6200H is compatible with both analog FM mode and dPMR single site conventional mode (Mode 2). Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and dPMR Mode 2 and to transmit either mode depending on the received signal.
50W 100% Duty Cycle Operation
Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR6200H provides a reliable 100% duty cycle operation at 50W output.
32 Channel Capacity and 5 Programmable Buttons
The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.
dPMR™ Mode 2, Analog FM and Mixed Mode
The IC-FR6200H is compatible with both analog FM mode and dPMR single site conventional mode (Mode 2). Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and dPMR Mode 2 and to transmit either mode depending on the received signal.
Multiple CTCSS, DTCS Tone and CC Decode
The IC-FR6200H decodes multiple CTCSS and DTCS as well as digital CC on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups.
19-inch Rack Mount, 2U Height Low Profile Design
The IC-FR6200H uses only 2U height. This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency.
Other features
- CW ID transmission
- Digital voice scrambler provides 15-bit key (about 32,000 codes)
- ±0.5ppm high frequency stability
- D-SUB 25-pin accessory connector
- Built-in inversion voice scrambler*
- PTT priority setting (Local Mic., external PTT or repeater operation)
- Built-in audio compander*
- 5-Tone and DTMF encoder/decoder*
- Normal and priority scan
- Low voltage alert*
- Key assign stickers supplied
* Analog mode only.
Rear panel view
- IDAS and IDAS logo are trademarks of Icom Incorporated.
- All other trademarks are the properties of their respective holders.
General:
IC-FR6200H (dPMR Version) |
||
|---|---|---|
| Frequency coverage | 400–470MHz | |
| Number of channels | Max. 32 channels | |
| Channel spacing | 6.25/12.5/25kHz | |
| Type of emission | 16K0F3E, 11K0F3E/F7E/F7D/F7W, 4K00F1E/F1D/F3E |
|
| Frequency stability | ±0.5ppm | |
| Antenna impedance | 50Ω (Type-N × 2) | |
| Operating temperature range | −30°C to +60°C | |
| Power supply voltage | 13.6V DC | |
| Current drain (at 13.6V DC) | TX 50W | 11A |
| RX Max. audio/Stand-by | 1.2A/450mA (LCD backlight OFF) |
|
| Dimensions (W×H×D) | 483×88×360 mm | |
| Weight | 10kg (approx.) | |
Transmitter
IC-FR6200H (dPMR Version) |
||
|---|---|---|
| Output power 100% duty cycle |
50W (adjustable to 5W) 50W (at 20–35°C, 24 hours) |
|
| Max. frequency deviation | ±5.0kHz/±2.5kHz (W/N) | |
| Spurious emissions | 80dB typ. | |
| FM hum and noise | 50/45dB typ. (W/N) | |
| Audio harmonic distortion | 1% typ. (40% deviation) | |
| Digital FSK error | 5% Max. | |
| Microphone impedance | 600Ω (8-pin modular) | |
Receiver
IC-FR6200H (dPMR Version) |
||
|---|---|---|
| Sensitivity | 12dB SINAD | 0.25μV typ. |
| 5% BER | 0.25μV typ. | |
| Adjacent channel selectivity | 78/56dB typ. (W/N) 63dB typ. (Digital) |
|
| Spurious response | 80dB (W/N) 80dBμV emf (Digital) |
|
| Intermodulation rejection | 78dB typ. (W/N) 75dBμV typ. emf (Digital) |
|
| Hum and noise ratio | 50/45/55dB typ. (W/N/D) | |
| Audio output power | 4.0W typ. at 5% distortion with a 4Ω load | |
| External speaker connector | 2-conductor 3.5 (d) mm (1/8″)/4Ω | |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G Method, Proc. |
|---|---|
| Low Temperature Storage |
500.5 I
|
| Low Temperature Operation |
500.5 II
|
| High Temperature Storage |
501.5 I
|
| High Temperature Operation |
501.5 II
|
| Low Temperature Storage |
502.5 I
|
| Low Temperature Operation |
502.5 II
|
| Temperature Shock |
503.5 I-C
|
| Humidity |
507.5 II
|
| Vibration |
514.6 I
|
| Shock Functional |
516.6 I
|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
All stated specifications are subject to change without notice or obligation.
Kucari.com menyediakan berbagai alat ukur dan instruments dari supplier dan distributor resmi yang tersebar dibeberapa kota di Indonesia seperti Jakarta, Bandung, Bekasi, Depok, Cikarang, Tangerang, Lampung, Pontianak, Jogja, Semarang, Solo, Batam, Padang, Pekanbaru, Malang, Surabaya, Medan, Makassar, Balikpapan, Samarinda, Pelembang, Riau, Aceh, Manado, dan Bali.

There are no reviews yet.