KIMO VT50 Hotwire Thermo Anemometer

KIMO VT50 Hotwire Thermo Anemometer This anemometer consists of two parts – the actual measuring display/adjustment unit and the hotwire probe. The probe is attached to the anemometer permanently via a flexible cable, allowing you to easily hold the display unit in one hand while you hold the hot wire probe in the other (e.g. inside a duct). If you still can’t see the screen, simply hit the HOLD button and the VT50 will store the current screen until you press the HOLD button again.

Description :

Better suited for measuring inside those tricky small or hard-to-reach ducts, the KIMO VT50 includes a long-length (300mm), small diameter (8mm) hot wire probe for reaching those applications where a normal anemometer would struggle.

KIMO VT50 is a thermo-anemometer – it can be used to test both air temperature and velocity levels. It can test temperature from -20 to +80°C and velocity from 0.15 to 30m/s. Results are highly accurate and you can test down as low as 0.1°C and 0.01m/s. Temperature measurements can be switched from Celsius/Fahrenheit, while velocity measures can be performed in metres per second, feet per minute or kilometres per hour. The KIMO VT50 is supplied as standard with a 1 year guarantee for any manufacturing defects.

Features :

300mm length, 8mm diameter hot wire probe makes it easier to test in difficult applications
Dual capabilities – measures both air temperature and velocity
Temperature measurement range from -20 to +80°C
Velocity measurement range from 0.15 to 30m/s
Switch between Celsius/Fahrenheit temperature measurement modes
Switch between m/s, fpm and km/h velocity measurement modes
Powered by 4 x AAA 1.5V batteries with life of 40 hours
HOLD function temporarily stores current value shown on the screen
1 year guarantee from KIMO

What’s In The Box :

(1) KIMO VT50 Thermo Anemometer
(1) Adjustment Certificate (not a full calibration certificate – available for purchase separately)
(1) Soft Carrying Case