Lutron FC-6000SD Frequency Counter 6 GHz

Lutron FC‑6000SD adalah frequency counter benchtop yang mampu mengukur frekuensi hingga 6 GHz—menjadikannya alat serbaguna untuk pengujian sinyal frekuensi tinggi (VHF/UHF) di laboratorium, telekomunikasi, dan elektronik .

LUTRON FC-6000SD Frequency Counter 6 GHz
Made in Taiwan

Fitur dan Spesifikasi Lutron FC-6000SD

• TCXO (temperature compensated crystal oscillator) time base, high stability & accuracy.
• High sensitivity for the VHF & UHF frequency measurement, useful for the CB amateur.
• Wide measuring range up to 6.0 GHz.
• Used the exclusive Microprocessor IC offered the intelligent function: Frequency, Period, Clock
  Width & Duty Multi resolution, Data hold, Relative measurement, Data record ( Max., Min.,
  Average reading ).
• 4.3 ” TFT LCD .
• 0.1 Hz resolution for 10 MHz.
• LCD display for low power consumption & clear read-out even in bright ambient light condition.
• Power supply from battery or AC to DC 9V adapter.
• RS 232 PC serial interface.
• Measurement
  Frequency, Data hold, Relative, Memory (max., min., average ), Period, Clock Width & Duty
• Range
  6.0 GHz : 950 MHz to 6000 MHz (INPUT A)
  1 GHz : 10 MHz to 1 GHz.(INPUT B)
  10 MHz & Period : 10 Hz to 10 MHz(INPUT C)
  Clock width & Duty : 10 Hz to 100 KHz(INPUT C)
• Resolution Sampling Time : Ref. the following “Table for Resolution & Sample Time”.
  Sensitivity (0 dB Function)
  6 GHz : ≦30 mVrms (950 MHz to 6 GHz).
  1 GHz : ≦30 mVrms (10 MHz to 1 GHz).
  10 MHz & Period : ≦15 mV rms.( 10 Hz to 10 MHz )
• Max. functional signal input ( Sensitivity
  6 GHz
  ≦1 Vrms(950 MHz to 1.5 GHz)
  ≦4 Vrms(1.6 GHz to 6 GHz)
  ( Sensitivity set to -20 dB position )
  1 GHz ≦4 V rms
  10 MHz, Period , ≦15 Vrms
  Clock width 3Vpp ~ 5 Vpp & Duty
• Over input ( Max signal will not hurt the circuit ) :
  6 GHz & 1 GHz range : 4 V rms
  10 MHz & Period , clock width & duty range : Max 15 Vrms
  Time base stability vs Temp: 1 PPM ( – 20 to 70 degree C )
• Frequency Accuracy : +-( 2 PPM + 1 d )
  Time base circuit : 20 MHz, TCX)
  Input connector :
  6 GHz range : N Coaxial Connector
  1 GHz range : N coaxial connector
  10 MHz & period range : BNC Connector

Accessories yang termasuk :

* Operation Manual
* Kartu Certificate Calibration
* PB-21 BNC to Alligator Cable connector
* BB-22 BNC to BNC Cable
* Batere AA (1,5V ) = 6 pcs
* Direct Probe with double N Coaxial Connector
* Coaxial Connector to BNC Connector adapter

Optional Accessories ( Tidak termasuk ) :

– SD memory Card
– USB-01 USB Cable
– Data Acquisition software SW-E816-32
– AP-9VA DC Adaptor