SPM VC100-Ex VibChecker Vibration Meter

SPM VC100-Ex VibChecker Vibration Meter is a light and compact-sized instrument for vibration measurement in the 10-1000 Hz frequency range. Measurement results are immediately and automatically evaluated against ISO standards. Green – yellow – red LEDs indicate vibration severity and a real time FFT spectrum is produced for easy pattern recognition. Results can be stored for documentation and follow-up.

With its built-in probe, easy button operation and clear symbols, VibChecker is an all set to go instrument; just point the probe and measure to locate vibration-related problems.

VibChecker is an instrument for fast and easy measurement of machine condition in preventive maintenance. The instrument and the monitoring technique are based on the recommendations of ISO2372 and ISO10816 standards for broad band measurements of vibration. These standards make the assumption that limited information, obtained easily and at a low cost, is often as pinuseful as a detailed analysis using expensive equipment and elaborate techniques.

VibChecker has a built in probe transducer. It is push button controlled and basic measurement data are entered manually. Evaluated measuring results are indicated by green-yellow-red LEDs and a real time FFT spectrum is produced for easy pattern recognition.

Specification :

Frequency range:    10 to 1000 Hz
Readings:    RMS/peak/peak-to-peak
Measuring range:    Velocity    0.5-49.9 mm/s RMS
(0.02-2.0 in/s RMS)
Acceleration    0.5-49.9 m/s2 (0.05-5.1g)
Displacement    0.5-99.9 µm (0.02-3.94 mils)
Condition evaluation:    according to ISO2372 and ISO10816 Part 2, 3, 4 >600 rpm
Spectrum:    linear, 200 lines, Hanning window, Hz/cpm, optical zoom, markers
General functions:    battery status display, transducer check, metric or imperial units, language independent menus with symbols, storage of up to 12 measuring samples
Condition indication:    green, yellow and red LED
Measurement indication:    blue LED
Display:    graphic monochrome, 64 x 112 pixels, LED backlight
Keypad:    sealed membrane (silicone rubber)
Material, casing:    ABS/PC
Power supply:    2 x 1.5 V AA batteries, alcaline or rechargeable
Battery life:    > 20 hours of typical use
Internal transducer:    accelerometer type MEMS
Input connector:    mini coax, for external transducer
External transducers:    vibration transducer TRM100 or IEPE (ICP) type transducers with voltage output
Output connector:    3.5 mm stereo mini plug for calibration and software update
Operating temperature:    0°C to +50°C (32°F to 122°F)
Dimensions:    158x62x30 mm (6.2×2.4×1.2 in)
Weight:    approx. 185g (6.5oz) including batteries