TESTO 425 Digital Thermal Anemometer

TESTO 425 Digital Thermal Anemometer is an easy to use anemometer with attached thermal probe on a telescopic handle. Just enter the duct measurements directly into the testo 425 and volume flow measurements (cfm) are shown on the clear display. You can switch between flow and temperature readings easily. Timed and multi-point mean flow calculations allow easy flow analysis, volume accumulation estimates, and temperature variation monitoring. Min-Max values are one button simple, while the “Hold” function freezes the current readings in the display for easy data recording.

Features :

• Auto Off
• TopSafe provides water, dirt and impact protection
• Flow, volume flow (cfm) and temperature measurements
• Multi-point and timed mean calculations
• Max-Min values make comparisons fast and easy
• “Hold” button freezes readings
• Clear backlit display

Specifications :

• Storage temperature:  -40 to +85 °C
• Operating temperature:  -20 to +50 °C
• Battery type:  9V block battery, 6F22
• Battery life:  20 h
• Weight:  285 g
• Dimensions:  182 x 64 x 40 mm
• Material/Housing: ABS
• Probe type NTC
• Meas. range:  -20 to +70 °C
• Accuracy:  ±0.5 °C (0 to +60 °C); ±0.7 °C (remaining range)
• Resolution: 0.1 °C
• Probe type Thermo
• Meas. Range:  0 to +20 m/s
• Accuracy:  ±(0.03 m/s +5% of mv)
• Resolution:  0.01 m/s

Includes :

• testo 425, thermal anemometer
• Permanently attached flow probe
• Temperature measurement
• Telescopic handle (max. 820 mm)
• Battery
• Calibration protocol