WATER LEVEL METER SOLINST 101 P2 M3 100 meter

WATER LEVEL METER SOLINST 101 P2 M3 100 meter

Alat Ukur Kedalaman Air
Water Level Meter
Model 101 Data Sheet

CODE : WATSOL101 Water Level 100m 101/P2/M3
WATSOL50 Water Level 50m   101/P2/M3 ( Indent )
WATSOL150 Water Level 150m 101/P2/M3 ( Indent )
WATSOL300 Water Level 300m 101/P7/M3 ( Indent )

For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter.

There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF tape. The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene tape.

Also available, is the less expensive Model 102 Coaxial Cable Water Level Meter for use in small diameter tubes, and the 102M Mini Water Level Meter on a small, compact reel
(see Model 102 Data Sheet).

Operating Principles

Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape, fitted on a well-balanced reel. They are powered by a standard 9 volt battery.

probes incorporate an insulating gap between electrodes.  When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

A sensitivity control allows the buzzer to be turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.

Reels

With a stand-alone design, convenient carrying handle, and sturdy probe holder, the standard reels are ergonomically designed for ease of use. They are robust and smooth running. The battery is housed in a convenient drawer in the front of the reel, allowing quick replacement. The reels are equipped with an on/off sensitivity switch, light, buzzer, battery test button, brake and a tape guide stored on the frame.

P7 Probe

P7 Probe is submersible up to 1000 ft. (300 m), ideal for measuring total well depth. The sensor at the tip of the probe provides consistent measurements with almost zero displacement. The tape seal plug design allows the probe to be quickly and easily replaced, if required.
Size: 5/8″ dia., 5.38″ long (16 mm x 137 mm)
Weight: ~4.5 ounces (128 g).

PVDF Laser Marked Tape

Model 101 P7 Water Level Meter uses extremely durable, PVDF flat tape, traceable to NIST and EU measurement standards. Each tape conductor contains 13 strands of stainless steel, and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency. The tape has a thick dog bone design that prevents adherence to wet surfaces, and allows it to hang straight in application. The tape is also easy to splice. The 3/8″ (10 mm) tapes come with permanent laser markings every 1/100 ft. or each millimeter.

LM2 :  Feet and tenths: with markings every 1/100 ft.
LM3 :  Meters and centimeters: with markings every mm.

Features :

Accurate:

• Markings each 1/100 ft. or millimeter
• Traceable to national standards
• Sensitivity adjustable to conductivity
• Probes avoid false readings in cascading water

Reliable:
• Permanent laser markings
• Non-stretch PVDF tape with stainless steel conductors

Long Life:
• Rugged, corrosion proof components
• Strong, flexible tapes
• Easy to splice and repair

Flexible:
• PVDF replacement tapes are interchangeable with other meters