HT Instruments COMBI 419 Multifunction Installation Tester

HT Instruments COMBI 419 Multifunction Installation Tester is an innovative multifunction installation tester designed to perform all safety test verifies on electrical installations in compliance to recently standards (VDE0100, BS7671 etc..), more than measure of leakage currents. The multifunction installation tester COMBI419 it’s very easy to use and have a wide number of internal features which are selectable by using the multi language menu.

Instrument permits, moreover, to start principal measures by using a special remote prove (PR400 optional accessory) particular useful to perform tests in very quickly mode and the AUTO internal function to perform sequential measurements of Global Earth Resistance, test on RCDs’ and Insulation directly on sockets of civil installations.

A contextual help menu selectable by user it’s available for each measurement function and permits a valid information during connection of meter to the installation. The newest electronic function selector give to the meter a extreme rugged structure for perfect using “on field”. A wide internal memory permits the saving of any measurements and the transfer to PC by serial port with dedicated software it’s possible. Each measure it’s saved with all the sub-results and test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measure was performed.

Features :

Continuity test with 200mA
Insulation with 50, 100, 250, 500, 1000VDC
Trip out time of RCDs type AC, A Standard and Selective
Trip out current of RCDs type AC, A Standard and Selective
Line/Loop Impedance P-P, P-N, P-PE
Line/Loop Impedance with high accuracy (with IMP57 optional accessory)
Prospective short circuit current
Contact voltage
Global Earth Resistance without RCD tripping
Phase sequence indication
AUTO function: (Ra + RDC test + Insulation) on plug
Measure with remote probe (with PR400 optional accessory)
Leakage current
Contextual help at display
Internal memory
Optical-USB interface with PC connection

What’s in the Box :

(2) AA Batteries
(1) UNIVERSALKIT COMBI, Set of 3 cables, 3 Aligator clips and 3 lead black
(1) C2033X, Cable with banana green, black, blue shuko plug
(1) BORSA75, Bag with three internal compartments, medium size, for transporting devices and accessories.
(1) ISO9000, calibration certificate
(1) User Manual