Lutron CP-1201 clamp sensor 1200 A

Lutron CP‑1201 adalah probe clamp arus AC hingga 1200 A yang dibuat untuk digunakan bersamaan dengan power analyzer seperti DW‑6093, DW‑6095, dan DW‑6195.

20 A/200 A/1200 A, 10 mV/A, 1 mV/A, 0.1 mV/A
For 3 phase power analyzer DW-6093, DW-6095

Fitur Lutron CP-1201 clamp sensor 1200 A

• Range : 20 A/200 A/1200 A.
• Output sensitivity : 10 mV/A, 1 mV/A, 0.1 mV/A.
• Output voltage : 200 ACmV ( 20 A, 200 A ), 120 ACmV ( 1200 A )
• Max. conductor size : 50 mm ( 1.9 inch ) Dia.
• Operation frequency : 50 Hz/60 Hz.
• Optional current probe for DW-6093, DW-6095.
• When change the new probe, the calibration procedures are not necessary to be executed.
• Signal output use the banana plugs, durable and safety.
• Power supply is from the meter (DW-6093, DW-6095 ), battery is not necessary.
• Measurement range 20 A/200 A/1200 A, switch selectable
• Output sensitivity 10 mV/A, 1 mV/A, 0.1 mV/A,AC coupled.
• Accuracy ± 1% F.S.
  * F.S. : Full scale of range.
  * 50/60 Hz..
  * 23 ± 5 ℃

  Frequency range : 45 to 400 Hz. * Accuracy tested under 50/60 Hz.
  Phase error < ± 1° * 50/60 Hz..
  Minimum load : 100 K ohm for specified accuracy.
  Enclosure material : UL 94-V0 rated.
  Safety : IEC 1010, Categories III 600V.
  Max. Jaw open size : 50 mm ( 2.0 inch ) Dia.
  Cable length : 4 meter
  DC plug size : 5.5 mm x 2.5 mm DIA.

  Accessories yang termasuk:
  * Operation Manual
  * Kartu Certificate Calibration