TRIMBLE R7 GNSS Base and Rover GPS Geodetic

TRIMBLE R7 GNSS Base and Rover GPS Geodetic Powered by the enhanced RTK engine, Trimble R-Track™ technology in the Trimble R7 GNSS supports the GPS Modernization signals L2C and L5, as well as GLONASS. The R7 GNSS is also capable of using the three levels of OmniSTAR3 positioning – OmniSTAR HP, OmniSTAR XP and OmniSTAR VBS. Its ability to track more satellites—both GPS and GLONASS—means Trimble R-Track can help to improve field productivity and the resulting postprocessed or RTK solution is enhanced.

Description :

Investing in the power of Trimble R-Track prepares you for future GNSS capabilities. Trimble, already proven in GPS, will continue to lead in additional GNSS support. Use the Trimble® Zephyr Geodetic™ 2 ground plane antenna to minimize signal multipath at the Trimble R7 GNSS base, providing the “cleanest” data. As a rover, the modular Trimble R7 GNSS with Trimble Zephyr 2 antenna is extremely flexible: Carry the receiver on the pole, wear it in the purpose-built Trimble backpack, or drive with the Trimble R7 GNSS inside your vehicle.

Code differential GNS positioning
Horizontal: 0.25 m + 1 ppm RMS
Vertical: 0.50 m + 1 ppm RMS
SBAS differential positioning accuracy : typically <5 m 3DRMS

Static GNS Surveying
High-precision static
Horizontal: 3 mm + 0.1 ppm RMS
Vertical: 3.5 mm + 0.4 ppm RMS

Static and FastStatic
Horizontal: 3 mm + 0.5 ppm RMS
Vertical: 5 mm + 0.5 ppm RMS

Real Time Kinematic Surveying
Single Baseline
Horizontal: 8 mm + 1 ppm RMS
Vertical: 15 mm + 1 ppm RMS

Network RTK
Horizontal: 8 mm + 0.5 ppm RMS
Vertical: 15 mm + 0.5 ppm RMS
Initialization time: typically <8 seconds
Initialization reliability typically >99.9%
Casing: Tough, lightweight, fully sealed magnesium alloy
Dimensions (W×HxL): 13.5 cm × 8.5 cm x 24 cm (5.3 in x 3.4 in x 9.5 in)